motec

Part No: #18027

OVERVIEW

The D153 display is part of MoTeC's D1 Series. This compact, configurable and high brightness colour display is readable in direct sunlight; it is used with M1 ECUs and Dash/Enclosed loggers.

Selectable fixed display layouts offer multiple style options or use Display Creator software for full screen customisation.

It is designed primarily for mounting on steering wheels, with inputs provided to suit steering wheel mounted switches that allow transmission of switch state on CAN.

FEATURES

Colour LCD display
Compact size to allow mounting on steering wheels
High brightness for sunlight readability
8 Analogue inputs
6 Switch inputs
Receives data from M1 ECUs and Dash/Enclosed Loggers via CAN
Sends input data to other devices via CAN

SPECIFICATIONS

Analog inputs

Amount: 8 (can be used for switches or potentiometers)
Measurement range: 0V to 4V
Maximum operating voltage = 7.0V *
Maximum protected voltage = 32V
Input equivalent: 10kΩ to 4.0V

* Above this voltage other inputs may be affected.

Switch inputs

Amount: 6
Threshold High max = 3.5V
Threshold Low min = 0.8V
Maximum operating voltage = 32V
Input equivalent: 10kΩ to 4.0V

Power supply

Operating voltage = 6.5V to 32V
Operating current = 380mA (typical) at 14V, full brightness
Reverse battery protected

Communications

CAN 1 Mbit/sec

Display

Type: TFT LCD, anti-reflective
Resolution: 320 x 240, anti-aliased graphics
Brightness: controlled via CAN message, 100 steps
Layouts: selectable fixed layouts
Display Creator software provides the tools for full screen customisation

Operating temperature

Internal: -20°C to 70°C (above 60°C maximum backlight brightness progressively reduced)
Typical maximum ambient temperature in free air: 50°C

Physical

Weight: 200gms (excluding wiring)
Anodised aluminium housing

SCREEN CLEANING

Wipe using a clean water dampened microfibre cloth, followed by a clean dry microfibre cloth.

COMPATIBILITY

MoTeC ECUs: All models that support CAN communication
MoTeC Displays/Loggers: All

SOFTWARE

Microsoft Windows based software
Display Creator allows for full customisation of the screen layout
Dash Manager used for setup and management of the display when combined with a C series Display/Display Logger

DIMENSIONS AND MOUNTING

PINOUT

No terminating connectors, two unterminated flying leads (cables A and B).

Cable A

Wire Colour	Name	Function	Internal Pin
Black	Bat Neg	Battery Negative	A 1
Red	Bat Pos	Battery Positive	A 2
Green	* CAN LO	CAN Bus Low	A 3
White	* CAN HI	CAN Bus High	A 4
Brown	AN1	Analog Input 1	A 7
Orange	AN2	Analog Input 2	A 8
Yellow	AN3	Analog Input 3	A 9
Blue	AN4	Analog Input 4	A 10
Violet	AN5	Analog Input 5	A 11
Grey	0V	Sensor 0 Volts	A 18

Cable B

Wire Colour	Name	Function	Internal Pin
Green	SW1	Switch Input 1	B 5
Blue	SW2	Switch Input 2	B 6
Violet	SW3	Switch Input 3	B 7
Grey	SW4	Switch Input 4	B 8
Orange	SW5	Switch Input 5	B 9
Yellow	SW6	Switch Input 6	B 10
White	AN6	Analog Input 6	B 12
Brown	AN7	Analog Input 7	B 13
Red	AN8	Analog Input 8	B 14

* The CAN wires must be twisted together.

USER MANUAL

Go to the D153 Dash Manager User Manual

PURCHASING

If you are interested in purchasing this product contact an Authorised MoTeC Dealer.

DOWNLOADS

Useful Links

This page shows the relevant downloads for this product. For a full selection of MoTeCs downloads visit the Downloads page.

To keep up-to-date with the latest webinars or software you can subscribe to our mailing lists and we will send you a message when new items are released.

To sign-up for a mailing list click the "SIGN-UP: WEBINAR NEWS" or "SIGN-UP: SOFTWARE RELEASE" button below.