motec

Part No: #18028

OVERVIEW

The D175 Display is part of MoTeC's D1 Series. This configurable and high brightness colour display is readable in direct sunlight and includes an integrated LED array; it is used with M1 ECUs and Dash/Enclosed Loggers.

Selectable fixed display layouts offer multiple style options or use Display Creator software for full screen customisation.

FEATURES

High resolution colour LCD display
Display size 125mm (5" approx)
High brightness for sunlight readability
10 full colour (RGB) LEDs; colour, function and intensity are fully programmable
8 analogue inputs
Autosport connector
Receives data from M1 ECUs and Dash/Enclosed Loggers via CAN
Sends input data to other devices via CAN

SPECIFICATIONS

Analogue inputs

Amount: 8 (can be used for switches or potentiometers)
Measurement range: 0V to 4V
Maximum operating voltage: 17V *
Maximum protected voltage: 32V
Input equivalent: 10kΩ to 4.0V

* Above this voltage other inputs may be affected.

Power supply

Operating voltage: 6.5V to 32V
Operating current: 380mA (typical) at 14V, full brightness
Reverse battery protected

Communications

CAN 1 Mbit/sec

Display

Type: TFT LCD, anti-reflective
Resolution: 600 x 480, anti-aliased graphics
Brightness: controlled via CAN message, 100 steps
Display Creator software provides the tools for full screen customisation
Selectable fixed layouts.

LED array

10 RGB LEDs
Colour, function and intensity are fully programmable.

Operating temperature

Internal: -20°C to 70°C (above 60°C maximum backlight brightness progressively reduced)
Typical maximum ambient temperature in free air: 55°C

Physical

Weight: 320gms (excluding wiring)
Anodised aluminium housing

SCREEN CLEANING

Wipe using a clean water dampened microfibre cloth, followed by a clean dry microfibre cloth.

COMPATIBILITY

MoTeC ECUs: All models that support CAN communication
MoTeC Displays/Loggers: All

SOFTWARE

Microsoft Windows based software
Display Creator allows for full customisation of the screen layout
Dash Manager used for setup and management of the display when combined with a C series Display/Display Logger

DIMENSIONS AND MOUNTING

Measurements in mm.

Note: Do not remove any part of the casing. The case provides electromagnetic screening to avoid interference with other equipment, and is also essential for thermal management. Thermal management may be compromised if mounted in a confined space, refer to the operating temperature specifications.

PINOUT

Mating connector: MoTeC #65048

Pin Number	Name	Function
1	Bat Neg	Battery Negative
2	Bat Pos	Battery Positive
3	CAN LO *	CAN Bus Low
4	CAN HI *	CAN Bus High
8	0V	Sensor 0 Volts
13	AN1	Analogue Input 1
14	AN2	Analogue Input 2
15	AN3	Analogue Input 3
16	AN4	Analogue Input 4
17	AN5	Analogue Input 5
18	AN6	Analogue Input 6
20	AN7	Analogue Input 7
22	AN8	Analogue Input 8

* The CAN wires must be twisted together.

PURCHASING

If you are interested in purchasing this product contact an Authorised MoTeC Dealer.

DOWNLOADS

Useful Links

This page shows the relevant downloads for this product. For a full selection of MoTeCs downloads visit the Downloads page.

To keep up-to-date with the latest webinars or software you can subscribe to our mailing lists and we will send you a message when new items are released.

To sign-up for a mailing list click the "SIGN-UP: WEBINAR NEWS" or "SIGN-UP: SOFTWARE RELEASE" button below.