Most MoTeC devices need to be connected to a laptop for configuration and data download.

This short-length Ethernet to Autosport adaptor cable enables the connection of a standard RJ45 network cable from a laptop to M1 ECU's and Display/Enclosed Loggers.

A longer 1.8m cable is also available.

• 61132 – ETHERNET TO AUTOSPORT CONNECTOR CABLE 1.8 METRE

• Length: .5 metres
• Weight: 54 g
• Connector: RJ45 with mounting capability
• Terminated with Autosport connector pins
• IP67 when used correctly with applicable MoTeC products
• Withstands continuous operation up to 85 degrees Celsius

The RJ45 connector can be mounted to provide a convenient network cable connection in the vehicle. The other end terminates with pins that plug into the Autosport connector.

Measurements in mm.

This pinout is suitable for cables identified as Revision: A and Revision: B on the affixed label.Note: Check the revision of the cable (identified on the label) before using the relevant pinout information from the table.

RJ45					M170/M182/M190			L180/C185/C187/C1812
Pin	Function	Revision	MoTeC Colour	Pin Numbering	M170 Pin	M182/M190 Pin	Function	L180/C185/ C187/C1812 Pin	Function
1	Ethernet TX+	Rev A & Rev B	Orange-White		55	C33	Ethernet RX+	77	Ethernet RX+
2	Ethernet TX–	Rev A & Rev B	Orange		61	C26	Ethernet RX–	78	Ethernet RX–
3	Ethernet RX+	Rev A	Green-White		48	C41	Ethernet TX+	67	Ethernet TX+
		Rev B	Green
6	Ethernet RX–	Rev A	Green		47	C34	Ethernet TX–	68	Ethernet TX–
		Rev B	Green-White

If you are interested in purchasing this product contact an Authorised MoTeC Dealer.