Most MoTeC devices need to be connected to a PC or laptop for configuration and data download.

This long-length Ethernet to Superseal adaptor cable enables the connection of a standard RJ45 network cable from your laptop to:

• M1 ECUs that use the Superseal connectors
• CDL3/C125/C127/C1212 Display Loggers
• L120 Enclosed Loggers.

A shorter 0.5m cable is also available.

• 61429 – ETHERNET TO SUPERSEAL CONNECTOR CABLE 0.5 METRE

• Length: 1.8 metres
• Weight: 120 g
• Connector: RJ45 with mounting capability
• Terminated with Superseal connector pins
• IP67 when used correctly with applicable MoTeC products
• Withstands continuous operation up to 85 degrees Celsius

The RJ45 connector can be mounted to provide a convenient network cable connection in the vehicle. The other end terminates with pins that plug into the Superseal connector.

Measurements in mm.

This pinout is suitable for cables identified as Revision: A and Revision: B on the affixed label.Note: Check the revision of the cable (identified on the label) before using the relevant pinout information from the table.

RJ45					M122/M130/M142/M150			CDL3/C125/C127/ C1212/L120
Pin	Function	Revision	MoTeC Colour	Pin Numbering	M122/ M130 Pin	M142/M150 Pin	Function	Pin	Function
1	Ethernet TX+	Rev A & Rev B	Orange-White		B25	D25	Ethernet RX+	11	Ethernet RX+
2	Ethernet TX–	Rev A & Rev B	Orange		B26	D26	Ethernet RX–	10	Ethernet RX–
3	Ethernet RX+	Rev A	Green-White		B23	D23	Ethernet TX+	2	Ethernet TX+
		Rev B	Green
6	Ethernet RX–	Rev A	Green		B24	D24	Ethernet TX–	1	Ethernet TX–
		Rev B	Green-White

If you are interested in purchasing this product contact an Authorised MoTeC Dealer.