Use this table to compare the main specifications of MoTeC display logger units and to determine the suitability of our different models for your application.

Key:
- Standard available
- Not available
(option) - Requires optional upgrade

MoTeC’s C1 Series Displays contain a comprehensive lap timing system that gives drivers all the information about their lap, without complex setup requirements.
The default lap timing method used with C1 Series Displays is GPS. This method is very accurate (with an average variance to track timing of 0.0088s) and as such is suitable for most applications. Install the GPS as per the install notes included with the GPS hardware.
*Note it is recommended that a GPS is installed on the roof or highest point of a vehicle, even though it may work in other areas.

Features of the MoTeC lap timing system:

Automatic update of GPS lap co-ordinates

• No need to manually insert GPS locations into the display. As you go from track to track, the dash selects the right co-ordinates automatically.

NEW - Hands free fastest lap updating

• Fastest laps in the C Series Displays are used to show drivers their fastest lap time as well as provide a base for the Gain/Loss display. When the driver goes quicker than their fastest lap time, the C Series Display automatically updates the fastest lap time value, and the Gain/Loss base updates to this new mark.

Fastest Lap Reset (Hold Alarm Acknowledge for 4 seconds)

• To make the most of the new Hands Free fastest lap updating feature a driver can choose to:
• Make fastest lap time apply to this session only
• Keep the fastest lap time from the last session
• Manually load a fast lap time from a previous session
  -- If alarm reset is held for 4 seconds, the currently held fastest lap time is set to 0, and it is automatically updated to a new value as the first lap time is completed.

The new C1 Series Displays now make important session information easy to use. Session Time, Laps Completed and Fastest Lap Time are all displayed on the default screens in prominent places, and reset as part of the Session Start reset.

• Session Start (Hold Alarm Acknowledge for 3 seconds)
• By holding the alarm reset button down for 3 seconds, the C1 Series Display recognises that a new session has begun. The dash resets the following channels:
• Lap Number
• Lap Time
• Session Timer
• The addition of a Session Timer in the standard template lets the driver know how long the session has been running. This invaluable information tells a driver how much time is left in those valuable practice and qualifying sessions.
• With the session reset, the driver can now be sure that their lap count is up to date.

Alarms in the C1 Series Displays can now be controlled in an all new way.
Alarms can still be created and modified in the alarm section of the C1 Series Manager software and when they become active, they are still displayed as a text overlay on the bottom row of the display.
The big change is the new ability to recall and view the status of any currently active alarms. By simply pressing the alarm acknowledge button whilst no alarms are displayed, the C1 Series Display brings up a multi-line box showing the state of all active alarms.
This is extremely useful if numerous alarms are active at one time and the driver needs to be able to see them all.

The C1 Series device is now ready to use. From here there are new features that you can customise to get the most from your C1 Series Display.

New layouts and colours

Choose from 10 different screen layouts with 16 different colour combinations, including:

• Circular bar graph for a clear RPM indication at a glance
• Smooth dial gauges
• Arched bar graphs for a stylish RPM display
• Wide flat bar to make the most of screen space
• Thin flat bar for a dedicated run up screen with all of the values at a glance.
  With a simple point and click interface, the display can be just what you need.

Display Creator

If the range of supplied layouts isn’t enough, then the Display Creator enable is for you. Display creator allows the full customisation of screens and channels without compromise. The types of features that can be designed with Display Creator include:

• High resolution splash and idle screens
• Numerous custom screens to suit every application
• Sponsor colour schemes and logos
• Custom dials, gauges and bars
• High res images to show information to drivers (such as failure locations in rally cars)
• Readable repair manual excerpts for long distance motorsport
• Sophisticated screen simulator to see what the driver sees
• Live driver display simulation from Telemetry